SSEDU SR1500 Industrial Mechatronic System With Seimens educational equipment teaching vocational education training equipment mechatronics training equipment Jinan
Modern industry is the integration of computer, information technology, modern management techniques, advanced technology, it covers product design, production preparation, manufacturing execution and many other content, and have been one of the important pillars in national construction and social development. In order to strengthen the students' ability to face the challenges of the society, it is urgent to improve the theoretical level and practical ability of mechatronics, photoelectric sensor, electrical automation and it has more understand practical significance to construct experimental platform of mechatronics flexible manufacturing systems as an important thing.
modular product system is flexible, it include complex technology and highly automated system that organically combine the microelectronics, computer information technology, control technology, machinery manufacturing and system engineering. Flexible manufacturing technology is the primary means which makes the modern machinery manufacturing fit market dynamic requirements and continual and fast update of products. It is the basis of advanced manufacturing technology
modular flexible manufacturing system is a set of teaching system which is complete, flexible, modular and extensible, its development and manufacturing are according to the practical level of students, from simple to complex, from parts to whole. It uses aluminum structure as the basic operating platform of the system, and finish flexible manufacturing system of modern assembly process by a variety of mechanical drive simulation. It fully demonstrates the electrical control part of actual industrial production, a variety of sensors, configuration control and Industrial bus of modern production in the system.
odular product system is developed on the basis of Siemens industrial automation PLC control system. The modular production line is flexible, it is a comprehensive training platform which is developed for advanced education and scientific research institutions, and it applies to the comprehensive application of technician who are dedicated in teaching and relevant profession in the mechatronics, networking, systematic, advanced manufacturing industry of various institutions of higher learning. It can process extraction and enrichment on industrial equipment, and makes special design for training teaching activities, combines photo electric sensor, machines, electricity, pneumatic and hydraulic organically. The system can not only be used as training system of automation and network, but also can construct network platform by combined with subsystem, and make expand use in it.
- Modular Production / Manufacturing System with at least 3 (three) process stations and 1 (one) storage station, each station can be used individually or combined with each other in any given configuration.
- Process stations consist of at least :
- Distributing/conveyor station
- Assembly station
- Sorting or testing station
- Control technology consists at least :
- PLC control package for each station at least equivalent with Siemens S7-1500
- EasyPort for simulation
- RFID System for each station
- Touch PC
- Control software included at least :
- Control software for PLCat least equivalent with TIA portal (bundle set)
- Software for components simulation and configuration
- Web based training PLC programming
- Web based training GrafCet
- Accesories :
- Height-adjustable trolleys for each station.
- Control console for each station.
- Workpiece set for process.
- Edutrainer at least equivalent with Siemens S7-1500.
- Power supply 24VDC.
- Simulation box.
- Signalling column.
- Ethernet cable at least 2m
- Compressor with accessory.
- I/O data cable with syslink connector (IEEE 488) with both ends at least 2 sets
- HMI at least equivalent with TP700.
- STEP 7 Upgrade Trainer Package free edition
- Other accesories to maintain 100% function of the system.
Complete operating manu
Basic electro-pneumatic components for each bench:
- electric buttons module
- electric relays module
- temporized relays module
- electronic pre-selection counter module
- emergency stop button
- inductive proximity sensor
- capacitive proximity sensor
- distributor terminal
-swing check valve
- electro-distributor with LED
- manometer
- pressure supply distributor with filter pressure reducer
Pneumatic regulation components:
- electric buttons module
- push button normally closed
- proportional electro-distributor (5/3, …)
- electro-distributor with LED (5/3 normally closed, 3/2 normally closed, …)
- monometer
- unidirectional flow limiter
- pressure supply distributor with filter pressure reducer
- air cross connect
- plastic hoses
- linear actuator, with guidance and all necessary accessories
- PID regulator
- comparison card
- analog pressure sensor
- pneumatic capacitors
- status regulator
- all necessary accessories for pneumatic regulation (potentiometer, damper, weight, …)
PLC equipped at least by:
- 24 VDC power supply
- Processor: 192 k bytes or better, memory 512 K bytes or better
- network interfacing (Profinet, Ethernet, USB, …)
- 16 digital inputs 24 VCC, potential separation LED light indication
- 16 digital outputs 24 VCC, 0.5A with galvanic separation and protection against short circuit
- 2 analog inputs
- 2 analog outputs
Supplied with Siemens S7-314CPLC:
- multi-users software teaching edition PLC programming including different languages(we supply free edition(free editon) software with unlimited users)
- connection PC-PLC
- spare parts set
- accessories set:
. electrical wires
. plastic hoses
. hoses connecting tools
. spare parts of first use
- practice activities manual book
- instruction book for the teacher including solutions for the practice activities
- silent air compressor with 30L, 8 bars minimum
- multi-users software for pneumatic and electromagnetic circuit simulation.
Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time. Please se photo for foreign sales department and photo for spare parts.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Company Information
We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today's and tomorrow's careers.
Photo for Clients Visiting Factory
Photo for Workshop and Equipments
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
|
No. |
Feature Name |
Details |
|
1 |
Customer design |
Yes |
|
2 |
Warranty |
1 year, 2 years, 3 years or 5 years according to client requirements |
|
3 |
Package |
Plastic film+ carton+ Fine plywood |
|
4 |
Products standard |
International didactic equipment standard |
|
5 |
Application range |
Educational equipment for university, college, vocational training centers |
|
6 |
Company philosophy |
Supply best quality Chinese products to the worldwide schools. |
|
7 |
Self owned brand |
Shouldshine, SSEDU, JSS. |
|
8 |
Production time |
From 10 days to 60 days according to different items |
Audited Supplier 
){kind=link}