| Customization: | Available |
|---|---|
| Warranty: | One Year |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
SE220 Educational Equipment Teaching Equipment Vocational Training Equipment Fluidised Bed Formation
1. Description
Bulk solids can be transformed from a fixed bed into a fluidised bed when liquids or gases pass through them. The areas of application of fluidised beds include the drying of solids and a wide variety of chemical processes.
A diaphragm pump delivers water from a storage tank into the bottom of the left side test tank. The water flows upwards through a porous sintered-metal plate. On the sintered At the time of the water is less than the so-called fluidisation velocity, the flow only passes through the fixed bed. At higher velocities the bed is loosened to such an extent that individual solid particles are suspended By the fluid. If the velocity is increased further, particles are carried out of the fluidised bed: transport takes place. Transport is only possible with the experimental unit. A filter at the top of the test tank holds these particles back. Water flows back into the storage tank.
The right-side test tank is similar to construction to the left-side one. An air flow generated by a compressor flows through it.
Manometers are mounted on both test tanks to measure the pressure loss. The flow rates are adjusted by way of valves, and can be read from flow meters. The test tanks are removable. This makes it easy to change the bulk solid filling.
Glass-shot beads in a range of particle sizes are provided as the bulk solid filling.
2. Technical details
Specification
Investigation of fluidised bed formation of solids in air and water
2 transparent test tanks to observe fluidised bed formation in air/water
1 manometer per tank to measure the pressure loss through each test tank
1 steel rule per tank to measure the change in height of the fluidised beds
Both test tanks removable for filling
Storage tank with diaphragm pump for water supply
Diaphragm compressor with compressed air accumulator for compressed air supply
Adjustment of flow rate for both media by valves and flow meter
Technical data
2 test tanks
Length: 550mm
Inside diameter: 44mm
Scale division: 1mm
Material: PMMA
Diaphragm pump (water)
Max. flow rate: 1,7L/min
Max. head: 70m
Diaphragm compressor (air)
Max. volumetric flow rate: 39L/min
Max. pressure: 2bar
Tanks
Water storage tank: approx. 4L
Compressed air accumulator: 2L
Measuring ranges
Pressure: 0...500mmWC (water)
Pressure: 0...200mmWC (air)
Flow rate: 0,2...2,2L/min (water)
Flow rate: 4...32L/min (air)
Height: 0...500mm
230V, 50Hz, 1 phase
230V, 60Hz, 1 phase; 120V, 60Hz, 1 phase
UL/CSA optional
Company Information
We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today's and tomorrow's careers.
Photo for Clients Visiting Factory
Photo for Workshop and Equipments
Servic
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
|
No. |
Feature Name |
Details |
|
1 |
Customer design |
Yes |
|
2 |
Warranty |
1 year, 2 years, 3 years or 5 years according to client requirements |
|
3 |
Package |
Plastic film+ carton+ Fine plywood |
|
4 |
Products standard |
International didactic equipment standard |
|
5 |
Application range |
Educational equipment for university, college, vocational training centers |
|
6 |
Company philosophy |
Supply best quality Chinese products to the worldwide schools. |
|
7 |
Self owned brand |
Shouldshine, SSEDU, JSS. |
|
8 |
Production time |
From 10 days to 60 days according to different items |
){kind=link}