Educational Equipment Vocational Training Equipment Experimental Heat Pumping and Accumulation Simulator

Product Details
Customization: Available
Warranty: One Year
Condition: New
Gold Member Since 2013

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
5000000 RMB
Plant Area
101~500 square meters
  • Educational Equipment Vocational Training Equipment Experimental Heat Pumping and Accumulation Simulator
  • Educational Equipment Vocational Training Equipment Experimental Heat Pumping and Accumulation Simulator
  • Educational Equipment Vocational Training Equipment Experimental Heat Pumping and Accumulation Simulator
  • Educational Equipment Vocational Training Equipment Experimental Heat Pumping and Accumulation Simulator
  • Educational Equipment Vocational Training Equipment Experimental Heat Pumping and Accumulation Simulator
  • Educational Equipment Vocational Training Equipment Experimental Heat Pumping and Accumulation Simulator
Find Similar Products

Basic Info.

Model NO.
ZM6192
Customized
Customized
Certification
ISO9001
Dimension
0.1cbm
Power
220V/50Hz
Package
Wooden Pallet
Weight
20kgs
Quotation Mode
Fob, CIF
Payment Mode
T/T, L/C
Color
Industrial Gray
Usage
Didactic Equipment for University
Type
Experimental Heat Pumping and Accumulation Simula
Transport Package
Wooden Box
Specification
ISO9001
Trademark
Should Shine
Origin
China
Production Capacity
2000sets/Yr

Product Description

ZM6192 Educational Equipment Vocational Training Equipment Experimental Heat Pumping and Accumulation Simulator



Educational Equipment Vocational Training Equipment Experimental Heat Pumping and Accumulation Simulator
 

  • You should give an experience and train on temperature control, automatic pressure control device pressure, and automatic defrost.
    You should give an experience and educate theoretically about the automatic control of the refrigeration system and the refrigerator components.
    You must establish the temperature range measure to create the P-I Diagram, so that these experiments and training are available, such as equipment change cycles,Secondary heat exchange, through the heat accumulation tank.
    You should check and adjust the flow of the heating medium (Water)
    You must obtain the most accurate data through the high and low pressure switch.
    The heat accumulation tank must be able to be visualized through transparent acrylic and the thermotherapy must circulate through the circulator.
    It should be structured in order to accumulate heat, to be able to see the states and flow of the refrigerant, and to understand the principle of the components, so as to maximize the achievements of education.
    It must be composed of accessories, in order to visualize the state, principle and flow of the refrigerant.
    You must have the power control (ON / OFF), monitors and data stored in the computer of the electrical control panel, through software.
    Must have fault insertion and simulation
    User manual in Spanish with theory and practices for instructor and student
    Size: 1800x1400x1000mm
    Freezer main controller
    - Adopted 32-bit high-performance ARM processor
    - Built-in USB port for PC connection
    - Up to 16 temperature modules can be interlocked
    - Built-in RS-485 communication terminal for multipoint communication
    - The RS-485 communication circuit must be designed as an insulation structure to improve noise immunity.
    - 12-bit AD input for pressure and humidity sensor interlocked 16Ch
    - Built-in 16-channel digital input for function control.
    - 16 built-in LEDs to verify the output status inside the PCB
    - Built-in 16 external LEDs to verify the output status
    - Up to 16 relay output channels (8 basic channels, 8 optional channels)
    - The relay for the output must have a rating of 10 A or higher.
    - The SMPS and DCDC converter must be integrated and designed with an external signal and an insulation structure.
    - Power source: AC86 ~ 264V, 50 / 60Hz free voltage
    - Within the size of PCB 250X140

    It should contain the components listed below as:
    Compressor 1 / 2HP, Single Phase 220V, Control Box
    Air-cooled condenser, single phase 220V
    Evaporation pump and chamber with heat accumulation.
    1 / 2HP Liquid Receiver
    1 / 2HP accumulator
    Manual or welding expansion valve.
    Electronic valve for 3/8 'operation with nut clamp, or welding.
    3/8 '' Filter Dryer with nut clamp, or welding.
    Pressure gauge: High pressure, Low pressure.
    High pressure switch, low pressure.
    Loading nozzles
    Acrylic visor, with nut or welding pliers
    Check valve (Welding)
    4-way valve (Welding)
    Refrigerator temperature module
    - Built-in 4Digit FND with good visibility
    - Up to 16 temperature modules can be interlocked
    - Built-in RS-485 communication terminal for multipoint communication
    - RTD type temperature sensor input
    - Accuracy within ± 0.2 degrees
    - Built-in 10A rating relay
    - Built-in 4-bit rotary switch for address configuration
    - Using a 10 A output relay
    - Power source: DC24V
    - Front PCB size within 70X50



     

Product Details and Warranty

We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.

We supply 3 years warranty time. Please se photo for foreign sales department and photo for spare parts.

Packaging & Delivery

Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.

Arrange delivery within 45 days upon receipt of payment.

Please see below photo for detailed package.

Company Information

We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today's and tomorrow's careers.

Photo for Clients Visiting Factory



Educational Equipment Vocational Training Equipment Experimental Heat Pumping and Accumulation Simulator

Photo for Workshop and Equipments




Educational Equipment Vocational Training Equipment Experimental Heat Pumping and Accumulation Simulator

Service

We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.

Certificate

Our products takes ISO9001 product management system.

No.

Feature Name

Details

1

Customer design

Yes

2

Warranty

1 year, 2 years, 3 years or 5 years according to client requirements

3

Package

Plastic film+ carton+ Fine plywood

4

Products standard

International didactic equipment standard

5

Application range

Educational equipment for university, college, vocational training centers

6

Company philosophy

Supply best quality Chinese products to the worldwide schools.

7

Self owned brand

Shouldshine, SSEDU, JSS.

8

Production time

From 10 days to 60 days according to different items

 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier