SR-WL302 Concentric Heat Exchanger Vocational Traning Equipment Thermal Trainer Kit
The Concentric Heat Exchanger should investigate the fundamental principles of heat transfer as applied to a liquid-to-liquid heat exchanger. A simple arrangement of valves allows operation as either a parallel flow or counter-flow heat exchanger enabling temperature profiles, energy balances, heat transfer coefficients and log mean temperature differences to be obtained for both conditions.
DESCRIPTION
The apparatus should required only a cold water supply, single phase electrical outlet and a bench top to enable a series of simple measurements to be made by students needing an introduction to heat exchanger design and operation. Experiments can be readily conducted in a short period of time, without the need of setting up operations, to accurately show the practical importance of the followings:
a) Temperature profiles
b) Co- and counter-current flow
c) Energy balances
d) Log mean temperature difference
e) Heat transfer coefficients
The equipment Should consists of a concentric tube exchanger in the form of "U", mounted on a support frame. The external surface of the exchanger is insulated. Six temperature sensors are installed in both the inlet and outlet tubes, to measure the fluid temperatures accurately. To minimise losses in the system, the hot water is fed through the inner pipe, with the cooling water in the outer annulus. Control valves are incorporated in each of the two streams to regulate the flow. The flow rates are measured using independent flow meters installed in each line. Temperature and flow readings could continuously being
captured and logged into the computer with optional Data Acquisition System. These data are useful for further calculations and analysis. On-line trending display allows student to observe the fluctuations of flow and temperature readings immediately.
The hot water system is totally self-contained. A hot water storage tank is equipped with an immersion type heater and a temperature controller. Circulation to the heat exchanger is provided by a pump, and water returns to the storage tank via a baffle arrangement to ensure adequate mixing. The cold water required for the exchanger is taken from the laboratory mains supply.
A readily identifiable valve arrangement allows simple change-over between co- and counter-current configurations.
Brand: Shouldshine
Model: SR-WL302
(Educational Equipment Teaching Equipment Vocational Training Equipment For engineering university, higher education college, polytechnics, technical institute, engineering training center, technical secondary school.)
Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time. Please se photo for foreign sales department and photo for spare parts.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Company Information
We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today's and tomorrow's careers.
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
Audited Supplier 
){kind=link}