FMS1602 SSEDU FMS Mechatronics Training System educational equipment teaching vocational education training equipment electronic trainer digital Jinan
a.FMS complete system 1 set
contain
A-storage station
B-mechanical maintenance station
C-assembly and quality control station
D-PLC station
E-tray tracking station
F-management station
Storage station
Cartesian robot
36 storage units
PLC control station
Aluminum profile frame
(1) Function: A 36-dimensional three-dimensional warehouse is used to store processing raw materials, and transport raw materials to the processing location according to the requirements of processing instructions.
(2) Composition: It is mainly composed of aluminum alloy profile base, rectangular coordinate robot, three-dimensional three-dimensional shelf, and electrical control unit.
Mechanical maintenance station
CNC Machine Center
X axis travel at least 200mm
Y-axis travel of at least 90mm
Z axis travel at least 150mm
Tool center range up to 12mm
Spindle motor 0.7W
Spindle speed: 300-2000
CNC turning center
Turning diameter of bed 200mm
Chuck diameter 100mm
Spindle speed 300-1750
X axis travel at least 60mm
Z axis travel at least 200mm
Robot arm
Control axis: 6
Load at least 6kg
Position repeatability ± 0.03mm
Up to 800mm
Assembly and Quality Control Station
Arm length:1000mm
Repeat accuracy: ±0.08mm
Protection range: IP65
Weight: 164kg
Working area: axis 1 ±180°
Axis 2 -60°~+140°
Axis 3 -155°~+80°
Axis 4 ±170°
Axis 5 ±180°
Axis 6 ±360°
Maximum speed:axis 1 145°/s
Axis 2 105°/s
Axis 3 170°/s
Axis 4 440°/s
Axis 5 435°/s
Axis 6 520°/s
Assembly station
Quality control station with vision machine system
Assembly station and quality control system must be integrated with CIM
The total length of the conveyor belt is at least 6 meters
The largest belt rotates 4 turns
Conveyor station: assembly for stopping workpieces, pallets for pallets
(1) Function: It mainly completes the assembly and quality inspection of the workpiece, removes the unsuitable workpiece and sends it to the waste bin, and transfers the qualified workpiece to the next workstation.
(2) Composition: It is mainly composed of aluminum alloy profile bench, visual inspection machine mechanism, assembly mechanism, waste bin, conveying mechanism, electrical control unit, etc.
Work process description: The main role of the inspection work unit is to check whether the quality of the assembly workpiece is qualified. Vision machine system inspection to determine whether the workpiece assembly is qualified. Substandard workpieces are sent to the waste bin through a conveyor. Qualified workpieces are sent to the storage warehouse on a conveyor belt.
PLC station
PLC station for monitoring and managing processes on pallets and conveyors
Real-time programmatic identification and tracking of pallets
(1) Function: Mainly complete the programming control of each station and manage the entire processing flow.
(2) Composition: It is mainly composed of aluminum alloy profile bench, Siemens 1200 series PLC module, power module, electrical control unit, etc.
Pallet tracking station
With the help of sensors and actuators at the stop, the stop allows the PLC to control and monitor the movement of the pallets on the conveyor. A PLC control unit monitors and manages the flow of pallets on the CIM conveyor.
(1) Function: It mainly completes the tracking management of the tray and monitors the movement process of the tray.
(2) Composition: It is mainly composed of aluminum alloy profile bench, Siemens 1200 series PLC module, touch screen unit, power module, electrical control unit, etc.
management station
CIM software provides a comprehensive solution for CIM / FMS learning and training methods, as well as operating and integrating real-time information in the system computer database, and maintaining online communication with all substations.
(1) Function: It mainly completes the tracking management of the tray and monitors the movement process of the tray.
(2) Composition: It is mainly composed of aluminum alloy profile bench, Siemens 1200 series PLC module, touch screen unit, power module, electrical control unit, etc.
b. CNC machine tool 1 set
CNC machining center
stroke
X at least 500mm
Y at least 300mm
Z at least 400mm
Variable spindle range 150-4000rpm
Load capacity of 300 kg
Spindle motor power 4KW
Handling metal and non-metal parts
The shaft must be driven by an AC servo motor, at least 6 sets of chuck tools
CNC turning center
At least 4 sets of chuck tools
X axis travel at least 150mm
Z axis travel 400mm
Spindle hole 50mm
Variable speed of main shaft 150-2000rpm
Bed swing 300mm
Motor 4KW
The shaft must be driven by an AC servo motor
Basic electro-pneumatic components for each bench:
- electric buttons module
- electric relays module
- temporized relays module
- electronic pre-selection counter module
- emergency stop button
- inductive proximity sensor
- capacitive proximity sensor
- distributor terminal
-swing check valve
- electro-distributor with LED
- manometer
- pressure supply distributor with filter pressure reducer
Pneumatic regulation components:
- electric buttons module
- push button normally closed
- proportional electro-distributor (5/3, …)
- electro-distributor with LED (5/3 normally closed, 3/2 normally closed, …)
- monometer
- unidirectional flow limiter
- pressure supply distributor with filter pressure reducer
- air cross connect
- plastic hoses
- linear actuator, with guidance and all necessary accessories
- PID regulator
- comparison card
- analog pressure sensor
- pneumatic capacitors
- status regulator
- all necessary accessories for pneumatic regulation (potentiometer, damper, weight, …)
PLC equipped at least by:
- 24 VDC power supply
- Processor: 192 k bytes or better, memory 512 K bytes or better
- network interfacing (Profinet, Ethernet, USB, …)
- 16 digital inputs 24 VCC, potential separation LED light indication
- 16 digital outputs 24 VCC, 0.5A with galvanic separation and protection against short circuit
- 2 analog inputs
- 2 analog outputs
Supplied with Siemens S7-314CPLC:
- multi-users software teaching edition PLC programming including different languages(we supply free edition(free editon) software with unlimited users)
- connection PC-PLC
- spare parts set
- accessories set:
. electrical wires
. plastic hoses
. hoses connecting tools
. spare parts of first use
- practice activities manual book
- instruction book for the teacher including solutions for the practice activities
- silent air compressor with 30L, 8 bars minimum
- multi-users software for pneumatic and electromagnetic circuit simulation.
Product Details and Warranty
We supply suitable spare pats according to experiment requirement, our products take aluminum structure, A4 paper dimension aluminum and plastic hanging box structure.
We supply 3 years warranty time. Please se photo for foreign sales department and photo for spare parts.
Packaging & Delivery
Package details: plastic film+ plastic foam + plywood box with pallet, and for equipment dimension less than 1CBM, we supply plastic film+ plastic foam+ fine carton.
Arrange delivery within 45 days upon receipt of payment.
Please see below photo for detailed package.
Company Information
We supply professional educational training equipment and technical teaching equipment, which has been widely applied in Engineering Universities, Polytechnics, Technical Institute, Vocational Schools as well as Industry workforce Development Programs and Training Center. Our products allow students to learn and experiment through valuable hands-on experience, and the technology covered by our training equipment provides knowledge, experiments and didactic skills development that are of critical importance to today's and tomorrow's careers.
Photo for Clients Visiting Factory
Photo for Workshop and Equipments
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
|
No. |
Feature Name |
Details |
|
1 |
Customer design |
Yes |
|
2 |
Warranty |
1 year, 2 years, 3 years or 5 years according to client requirements |
|
3 |
Package |
Plastic film+ carton+ Fine plywood |
|
4 |
Products standard |
International didactic equipment standard |
|
5 |
Application range |
Educational equipment for university, college, vocational training centers |
|
6 |
Company philosophy |
Supply best quality Chinese products to the worldwide schools. |
|
7 |
Self owned brand |
Shouldshine, SSEDU, JSS. |
|
8 |
Production time |
From 10 days to 60 days according to different items |
Audited Supplier 
){kind=link}
){kind=link}